Numeral 12 — NOM-010-ASEA-2016, Gas Natural Comprimido (GNC). Requisitos mínimos de seguridad para Terminales de Carga y Terminales de Descarga de Módulos de almacenamiento transportables y Estaciones de Suministro de vehículos automotores.

12 Bibliografía

Para la elaboración de esta Norma Oficial Mexicana se consultaron los documentos siguientes:

12.1. ANSI (American National Standards Institute):

a) ANSI NGV 1-2006 Natural Gas Vehicles (NGV) Fueling Connection Devices.

b) ANSI NGV 2,-2007 American National Standard for Natural Gas Vehicle Containers.

c) ANSI/ISA 84.00.01 part. 3 2004. Functional Safety: Safety Instrumented Systems for the Process

Industry Sector-Part 3: Guidance for the Determination of the Required Safety Integrity Levels.

12.2. ASME (American Society of Mechanical Engineers):

a) ASME Boiler and Pressure Vessels Code, Section VIII or Section X, Rules for the construction of

Unfired Pressure Vessels, Div. 1 or Div. 2.

b) ASME Boiler and Pressure Vessels Code, Section X, Fiber reinforced plastic pressure vessels.

c) ASME B31.3, 2012, Process Piping.

12.3. ASTM (American Society for Testing and Materials):

a) ASTM A47/A47M-99(2009) Standard Specification for Ferritic Malleable Iron Castings.

b) ASTM A105/A105M-11a Standard Specification for Carbon Steel Forgings for Piping Applications.

c) ASTM A106/A106M-11 Standard Specification for Seamless Carbon Steel Pipe for High Temperature

Service.

d) ASTM A269-10 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing

for General Service.

e) ASTM A372/A372M-10 Standard Specification for Carbon and Alloy Steel Forgings for Thin Walled

Pressure Vessels.

f) ASTM A395/ A395M 99(2009) Standard Specification for Ferritic Ductile Iron Pressure Retaining

Castings for Use at Elevated Temperatures.

g) ASTM A536-84(2009) Standard Specification for Ductile Iron Castings.

h) ASTM E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C.

12.4. D.M. 19/09/26. Recipienti per transporto di gas compressi, liquifatti o disciolti con capacita fino a

1000 litri.

12.5. ISO (International Organization of Standardization):

a) ISO 9809 -1:2010 Gas cylinders refillable seamless steel gas cylinders -Design, construction and

testing-Part 1: Quenched and tempered steel cylinders with tensile strength less than 1 100 MPa.

b) ISO 9809 -3:2010 Gas cylinders refillable seamless steel gas cylinders -Design, construction and

testing-Part 3: Normalized steel cylinders.

c) ISO 11439:2000 Gas Cylinders -High Pressure Cylinders for the on-board storage of natural gas as a

fuel for automotive vehicles.

d) ISO 15501 -1:2012 Road vehicles -Compressed n atural gas (CNG) fuel systems -Part 1 Safety

requirements.

e) ISO 15501-2:2001 Road vehicles-Compressed natural gas (CNG) fuel systems-Part 2 Test methods.

12.6. NFPA (National Fire Protection Association):

a) NFPA 37, Standard for the installation and Use of Stationary Combustion Engines and Gas Turbines,

2010 Edition.

b) NFPA 52, Compressed Natural Gas (CNG) Vehicular Fuel System, 2010 Edition.

c) NFPA 59A: Standard for the Production Storage and Handling of Liquefied Natural Gas (LNG).

d) NFPA 70: National Electrical Code, 2011 Edition.

12.7. IEC (International Electrotechnical Commission)

a) IEC-61511 part. 3: 2003 Functional safety -Safety instrumented systems for the process industry

sector.

12.8. Center for Chemical Process Safety.

a) Layer of Protection Analysis: Simplified Process Risk Assessment (2001).