Numeral 9 — NOM-011-SECRE-2000, Gas natural comprimido para uso automotor. Requisitos mínimos de seguridad en instalaciones vehiculares.

9 Bibliografía

Para la elaboración de esta Norma se consultaron los documentos siguientes:

9.1 AGA (American Gas Association):

ANSI/AGA NGV 1, 1992, Requirements for compressed natural gas vehicles (NGV) refueling connection

devices.

ANSI/AGA NGV 2, 1992, Basic requirements for compressed natural gas vehicle (NGV) fuel containers.

9.2 API (American Petroleum Institute):

API RP 2003 Protection against ignitions arising out of static, lightning and stray currents, fourth edition

1982.

9.3 ASME (American Society of Mechanical Engineering):

ANSI/ASME B31.3 (1980) American National Standard Code for Chemical Plant and Petroleum Refinery

Piping.

9.4 ASTM (American Society for Testing and Materials):

ASTM A-47-1984, Specification for Malleable Iron Castings.

ASTM A-395-1986, Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated

Temperatures.

ASTM A-536-1984, Specifications for Ductile Iron Castings.

ASTM E-136-1982, Standard Method of Test for Behavior of Materials in a Vertical Tube Furnace

at 750 °C.

ASTM A-269-1982, Standard for Stainless Steel Seamless Tubing.

ASTM A-105-1982, Forging, Carbon Steel for Piping Components.

ASTM A-106-1982, Seamless Carbon Steel Pipe for High-Temperature Service.

ASTM A-372-1982, Specification for Carbon and Alloy Steel Forging for Thin-Walled Pressure Vessels.

9.5 CGA (Canadian Gas Association):

CGA S-1.1. Pressure Relief Device Standards Part 1- Cylinders for Compressed Gases (1989).

ANSI/CSA/CGA Standard V-1, Compressed Gas Cylinder Valve. Outlet and Inlet Connections (1987).

9.6 CSA (Canadian Standards Association):

CSA B51 1991, Boiler Pressure Vessel and Pressure Piping Code.

9.7 CRN (Canadian Registration Number)

9.8 DOT (Department of Transportation):

49 CFR CH.1 Research and Special Programs Administration (10-1-86).

DOT-3AA. High Pressure Steel High Pressure Steel Cylinders

9.13.3 ISO 11439:2000, Gas Cylinders -High Pressure cylinders for the on-board storage of natural gas as

a fuel for automotive vehicles

9.9 NFPA (National Fire Protection Association):

NFPA-37 Standard for the installation and Use of Stationary Combustion Engines and Gas Turbines, 1990

Edition.

NFPA -52 Compressed Natural Gas (CNG) Vehicular Fuel System 1995 Edition.

NFPA -70 National Electrical Code, 1995 Edition.

9.10 CGA (Compressed Gas Association)

C-6 Standards for Visual Inspection of Steel Compressed Gas Cylinders.

9.11 International Organization of Standardization.

ISO-9809. Refillable Seamless Steel Gas Cylinders, Design, Construction and Testing.

ISO/bis-14446.- Vehicles

ISO 15501-1:2000, Road vehicles - Compressed (CNG) fuel system components - Part 1: General

requirements and definitions

ISO 15501-2:2001 “Road vehicles - Compressed (CNG) fuel system - Part 2: Test methods”.

9.14 D.M. 19/09/26 Recipienti per transporto di gas compressi, liquifatti o disciolti con capacita fino

a 1000 litri.